Introducing The

14|CX Bandsaw

With PWM 1 DRO Logo1 View 14|CX Product Page

14|CX Highlights

  • DRO – The digital readout provides a quick and easy reference for blade speeds. The DRO displays in “SFPM” (surface feet per minute). This is the speed that the teeth of the blade are moving. This number can be set by using a blade speed chart for the specific blade and material being used to achieve high quality cuts in a wide range of materials.
  • 2 Speed Pulley – The 2-step pulley provides a mechanical High and Low range to keep the bandsaw in the correct torque range for the blade speed and materials being cut. The belt position should be set first and then the final speed should be set by turning the speed control knob. The pulleys use a poly-groove drive belt to prevent slipping even when cutting the toughest materials.
  • Speed Control Knob – The speed control knob can be used to change the speed on the fly if needed, meaning that you can increase or decrease speed during the cut to optimize the performance of the blade in the specific material being cut. It is conveniently located on the control panel adjacent to the DRO display.
  • PWM – Electronic speed control is provided by the PWM system (pulse width modulation) which uses an inverter to control the output to the powerful DC motor. This system has the added benefit of quickly stopping the motor and wheels when shut off.

14CX DRO 1x1

Digital Readout

The digital readout provides a quick and easy reference for blade speeds. The DRO displays in “SFPM” (surface feet per minute). This is the speed that the teeth of the blade are moving. This number can be set by using a blade speed chart for the specific blade and material being used to achieve high quality cuts in a wide range of materials.

Speed Control Knob

 The speed control knob can be used to change the speed on the fly if needed, meaning that you can increase or decrease speed during the cut to optimize the performance of the blade in the specific material being cut. It is conveniently located on the control panel adjacent to the DRO display.

Laguna 14CX Belt Pulleys Upper

2 Speed Pulley

The 2-step pulley provides a mechanical High and Low range to keep the bandsaw in the correct torque range for the blade speed and materials being cut. The belt position should be set first and then the final speed should be set by turning the speed control knob. The pulleys use a poly-groove drive belt to prevent slipping even when cutting the toughest materials.

14CX Motor 1x1

PWM

The 2-step pulley provides a mechanical High and Low range to keep the bandsaw in the correct torque range for the blade speed and materials being cut. The belt position should be set first and then the final speed should be set by turning the speed control knob. The pulleys use a poly-groove drive belt to prevent slipping even when cutting the toughest materials.

https://www.youtube.com/watch?v=xgow5LLBh1o View 14|CX Product Page

Technical Specifications

  • Motor Voltage/HP

    166VDC / 1 3/4 HP

  • Supply Voltage

    110V Single Phase

  • Throat

    13-5/8″ (346mm)

  • Table, Cast Iron

    16″ x 21-1/2″ (406.4mm x 546mm)

  • Table Tilt

    – 7 Degrees + 45 Degrees

  • Miter Slot

    3/8″ x 3/4″ (9.525mm x 19.05mm)

  • Table Height

    38″ (965mm)

  • Blade Speed Range High

    160 – 4400 ft/min

  • Blade Speed Range Low

    60 – 1600 ft/min

  • Fly Wheel

    Cast Iron

  • Resaw Capacity

    13″ (330.2mm)

  • Minimum Blade Length

    114-3/4″ (2,914mm)

  • Maximum Blade Length

    116″ (2,946mm)

  • Maximum Blade Width

    3/4″ (19mm)

  • Minimum Blade Width

    1/8″ (3mm)

  • Guides

    Laguna Ceramic

  • Height

    70-1/2″ (1,790mm)

  • Machine Dimensions (W X D)
    Base FootPrint

    29-3/4″ x 28″ (755mm x 712mm)
    22-11/16″ x 17-9/16″ (576mm x 446mm)

  • Machine Dimensions w/ Mobility Kit(W X D)
    Base FootPrint w/ Mobility Kit

    36-5/8″ x 28″ (930mm x 712mm)
    33″ x 20-1/2″ (838mm x 521mm)

  • Weight (Gross)

    286 lbs. (130 kg)

  • Weight (Net)

    264 lbs. (120 kg)

  • Package Size (W x D x H)

    73-1/8″ x 26-1/2 x 24-5/16″
    (1857mm x 673mm x 618mm)

  • Mobility Kit

    Optional “MBA 14|12 Wheel System”

  • Industrial Work Light

    Optional

Be The First To Know

Complete the form to be among the first notified when the 14|CX becomes available through our authorized dealers